Penetration Bitumen 100/150 (also called bitumen 100/150, 100/150 pen bitumen or soft paving grade bitumen) is a soft-grade paving bitumen produced from the residue of vacuum distillation of crude oil. The grade name refers to its needle penetration at 25 °C of 100–150 dmm (tenths of a millimetre); its softening point is 39–47 °C and its specific gravity is 1.01–1.06.
Its softness and good low-temperature flexibility make it a preferred choice for road construction in cold climates and for light to moderate traffic loads. It is also widely used as the binder in surface dressing (chip seals) and tack coats, and as the base bitumen for producing polymer modified bitumen (PMB) and bitumen emulsions.
Pars Universal Bitumen (PUB-Ltd) supplies Penetration Bitumen 100/150 in new steel drums (150–180 kg net), bulk in bitutainers or tankers, and jumbo bags, with worldwide shipping. See the technical data sheet below or contact us for a free quote.
Penetration Bitumen 100/150, has a broader range of needle penetration compare to the previous grades. Its penetration is between 100 to 150 desi-millimeter. Also, the softening point of this grade is between 39 and 47 . Furthermore, it should be mentioned that this grade is a temperature-dependent (thermoplastic) product. The higher the temperature, the softer it will be. And vice versa, the lower the temperature, the harder bitumen will be.
Bitumen Grade 100/150 can act as a Newton type fluid, unlike modified bitumen at in-service temperatures. This grade of bitumen is used in road construction and repairing and in production of seals and coatings.
Moreover, one of the unique applications of Penetration Bitumen 100/150 is to be used as a raw material to manufacture polymer modified bitumen (PMB) and most kinds of emulsion bitumen.
New steel drum, bulk.
Soft Bitumen 100/150 is available in various packaging forms depending on customer needs:
New steel drums (150–180 kg net)
Bulk in bitutainers or tankers
Polybag and craft paper bag (on request)
Jumbo bags (for large-volume orders)
Q: What is penetration bitumen 100/150?
A: Penetration bitumen 100/150 is a soft paving-grade bitumen with a needle penetration of 100–150 dmm at 25 °C and a softening point of 39–47 °C. It is mainly used in cold-climate roads, surface dressing and as a base binder for PMB and emulsions.
Q: What is the difference between bitumen 100/150 and 60/70?
A: Bitumen 100/150 is softer (penetration 100–150 dmm versus 60–70 dmm) with a lower softening point. It suits colder climates and lighter traffic, while harder grades such as 60/70 are generally preferred in warmer climates and heavier traffic.
Q: Can bitumen 100/150 be used to make emulsion or polymer modified bitumen?
A: Yes. Soft grades like 100/150 are commonly used as the base bitumen for bitumen emulsions and polymer modified bitumens.
Q: How is penetration bitumen 100/150 packed?
A: In new steel drums (150–180 kg net), in bulk (bitutainers or tankers) and in jumbo bags.
You can examine the technical details of Penetration Bitumen 100/150 product on the table. All the information you need about the product is included in the table.
Get a personalized quote for your specific requirements by writing to us at [email protected] or simply filling out the inquiry form here.
Last reviewed: November 2026
| Property | Test Method | Unit | Specification |
|---|---|---|---|
| Specific Gravity @ 25/25 °C | ASTM D70/D70M | – | 1.01 – 1.06 |
| Penetration @ 25 °C | ASTM D5/D5M | 0.1 mm | 100 – 150 |
| Softening Point (Ring & Ball) | ASTM D36/D36M | °C | 39 – 47 |
| Ductility @ 25 °C | ASTM D113 | cm | 100 min |
| Loss on Heating | ASTM D6/D6M | % wt | 0.2 max |
| Drop in Penetration after Heating | ASTM D6/D6M & D5/D5M | % | 20 max |
| Flash Point (Cleveland Open Cup) | ASTM D8254 | °C | 250 min |
| Solubility in Trichloroethylene or Toluene | ASTM D2042 | % wt | 99.5 min |
| Matter Insoluble in Trichloroethylene or Toluene | ASTM D2042 | % wt | 0.2 max |
| Spot Test | AASHTO T 102 | – | Negative |
Have any questions or concerns, or need more information? Reach out to our team at [email protected]
You can contact our team for more detailed explanations. We are here to help you.
Our professional team offers you the most suitable products for your projects with quality and reliability.