Oxidized Bitumen 105-15 Description:
Oxidized Bitumen 105-15 created by further vigorous air process another names of it is blown asphalt 105/15, oxidized bitumen 105/15, hard bitumen. It also is Semi Solid grade of pure petroleum bitumen made by air-blowing through an asphalt flux. Because of physical specs it uses in construction.
Passing air through bitumen at elevated temperature can used to alter its physical properties. Degree of oxidation ranges from very small, or semi-blowing, through to “full” blowing. Bitumen specs are significantly different to penetration grade bitumens.
Nomenclature and grading for the oxidised bitumen products is based on a combination of temperature. At which bitumen reaches a certain “softness” when being heated up as expressed by ring and ball softening point test, and the penetration value
As said before, Oxidized asphalt 105/15 is based on petroleum bitumen which is made by blowing bitumen 60/70 by very hot air. In addition the numbers relate to the midpoint of material’s softening point and penetration respectively. The softening point value measured by Ring and Ball method as determined by ASTM D36. Also penetration value is in 1/10 mm as determined by IP49 or ASTM- D5.
Also currently Oxidized Bitumen oil refining method, visbreaking residue production is the use of 2 differentsets of process equipment will produce qualified products according to different market and season demand. Probably, this production isn’t only huge investment, however conjointly waste a lot of high quality heat.
It’s using as raw material also for BITUMEN coat, roofing, insulation Isolation bitumen membrane sheet. Oxidized asphalt 105/15 uses also in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen. Also it uses in civil works, roofing, construction industries. Furthermore for sealing and insulating buildings, adhesive, construction materials additive, dust-binding. Furthermore its apply in coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 105/15 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 105/15 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.
Before using bitumen 150/5 surfaces must be dry, clean and free of loose types, curing products, disorders, and slurry. Furthermore if you use this types of bitumen without cleaning area bitumen 150/5 will easily remove.
Oxidized bitumen uses in waterproofing and joints finally, because its minimum amount of obtaining the joint. Also their wide temperature vary prevents hurt in hot temperature usages. Also oxidized bitumen will even be apply in industrial uses like roofing, flooring, mastic, pipe coatings, electrical applications to decision several.
10 Years with multi time heating and colding, please refer to MSDS. Oxidized bitumen grades or alter bitumen created by passing air through soft bitumen below controlled temperature conditions. This methodology also provides bitumen further rubbery properties than penetration or exhausting grade bitumen. In addition has uses in industrial uses.
Available in 25kg meltable and craft bag, carton box.