penetration bitumen 30-40, bitumen 30/40, penetration 30/40

Penetration Bitumen 30/40 | Bitumen 30/40

Product Overview

Penetration Bitumen 30/40 (also called bitumen 30/40, 30/40 pen bitumen or hard paving grade bitumen) is a hard grade of paving bitumen produced from the residue of vacuum distillation of crude oil. The grade name refers to its needle penetration at 25 °C of 30–40 dmm (tenths of a millimetre); its softening point is 55–63 °C and its specific gravity is 1.01–1.06.

Being much harder than common grades such as 60/70, it gives asphalt mixtures higher stiffness and better resistance to rutting under heavy loads and high temperatures. It is mainly used in highway construction in hot climates, industrial roads, heavy-traffic pavements and airport areas, and as a base for producing harder or modified bitumen.

Pars Universal Bitumen (PUB-Ltd) supplies Penetration Bitumen 30/40 in steel drums (150–180 kg net), bulk in tankers or bitutainers, and jumbo bags on request, with worldwide shipping. See the technical data sheet below or contact us for a free quote.

Penetration Bitumen 30/40 Technical Properties

PUB-Ltd. Paving Bitumen 30/40 manufactured in two ways: It can be made by passing vacuum bottom products through heated air or it can be produced from oil cracking residues and remove hydrocarbons from it. 

Pen Grade Bitumen 30/40 Typical Properties:

  • Penetration: 30–40 dmm

  • Softening Point: 52–60°C

  • Ductility: >100 cm at 25°C

  • Flash Point: >230°C

  • Solubility in TCE: >99.5%

Paving Bitumen 30/40 Applications

PUB-Ltd. manufactured Penetration Bitumen 30/40 has special use alongside its other applications. It is used as the main composition of airport runways. Also, it’s performance is superior in the zones where there is a temperature level changing range of 25 ℃.

Pen Grade Bitumen 30/40 Usage

  • Highway Construction in Hot Climates – Perfect for regions with high ambient temperatures where rutting resistance is essential.

  • Runways and Industrial Roads – Used in high-load areas that require stiff, long-lasting pavement surfaces.

  • Asphalt Mixes for Heavy Traffic – Ensures structural durability under constant or heavy vehicular pressure.

  • Bitumen Blending – Acts as a base for producing harder or modified bitumen types.

  • Waterproofing & Damp-Proofing – Due to its hardness and weather resistance, it’s also used in industrial sealing applications.

Hard Asphalt Binder 30/40 Packing

  • Steel Drums (150–180 kg net)

  • Bulk in Tankers or Bitutainers

  • Jumbo Bags or Polybags (on request)

  • Customized Packaging for specific project requirements

FAQs About Penetration Bitumen 30/40

Q: What is penetration bitumen 30/40?
A: Penetration bitumen 30/40 is a hard paving-grade bitumen with a needle penetration of 30–40 dmm at 25 °C and a softening point of 55–63 °C. It is used where stiffness and rutting resistance are needed.

Q: What is the difference between bitumen 30/40 and 60/70?
A: Bitumen 30/40 is harder (penetration 30–40 dmm versus 60–70 dmm) with a higher softening point. It suits hot climates and heavy traffic, while 60/70 is a general-purpose paving grade.

Q: Where is bitumen 30/40 used?
A: Mainly in highways in hot climates, industrial roads and heavy-traffic pavements.

Q: How is penetration bitumen 30/40 packed?
A: In steel drums (150–180 kg net), in bulk (tankers or bitutainers) and in jumbo bags on request.

Hard Asphalt Binder 30/40

Technical Data Sheet

You can examine the technical details of Penetration Bitumen 30/40 product on the table. All the information you need about the product is included in the table.

Get a personalized quote for your specific requirements by writing to us at [email protected] or simply filling out the inquiry form here.

Property Test Method Unit Specification
Specific Gravity @ 25/25 °C ASTM D70/D70M – 1.01 – 1.06
Penetration @ 25 °C ASTM D5/D5M 0.1 mm 30 – 40
Softening Point (Ring & Ball) ASTM D36/D36M °C 55 – 63
Ductility @ 25 °C ASTM D113 cm 100 min
Loss on Heating ASTM D6/D6M % wt 0.2 max
Drop in Penetration after Heating ASTM D6/D6M & D5/D5M % 20 max
Flash Point (Cleveland Open Cup) ASTM D8254 °C 250 min
Solubility in Trichloroethylene or Toluene ASTM D2042 % wt 99.5 min
Matter Insoluble in Trichloroethylene or Toluene ASTM D2042 % wt 0.5 max
Spot Test AASHTO T 102 – Negative

Have any questions or concerns, or need more information about Hard Asphalt Binder 30/40? Reach out to our team at [email protected]

You can contact our team for more detailed explanations. We are here to help you.

Our professional team offers you the most suitable products for your projects with quality and reliability.

penetration bitumen 30-40, bitumen 30/40, penetration 30/40