/Oxidized Bitumen 105-35
Oxidized Bitumen 105-35

Oxidized Bitumen 105-35

Oxidized Bitumen 105-35 Description:

modify bitumen like Oxidized Bitumen 105-35 has various edges over several total completely different bituminous materials to use in such mixture visible of temperature standing, toughness, abrasion strength, and weathering properties of applied films. However, modify bitumen has one determined loss to use in coating formula, considerably. Furthermore its tendency to provide solutions of undesirably high body, or solutions that tend to extend in body on aging. These undesirable body specs more pronounced in some solvents than in others, and ar significantly unhealthy among the case of the additional volatile crude solvents.

Oxidized bitumen 105/35 is suitable grade of oxidised asphalt to use as bonding compounds as hot melt adhesive at an application rate of approximately 1 Kg/m3 to bond the preformed sheets together also to structure which is made by blowing bitumen 60/70 by very hot air.

Recommend Uses Oxidized bitumen 105-35:

It’s using most of all as raw material for BITUMEN coat, roofing, insulation and Isolation bitumen membrane sheet.

Oxidized bitumen 105/35 especially uses in chemicals, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing. In roads it also applies in construction, pavement ,crack seal also repairmen, civil works, roofing, construction industries. In addition it uses in sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 105/35 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 105/15 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint

Surface Preparation

Oxidized bitumen has wide used as an anti-slip layer compound within piling industry, also for producing of sound dampening felts, roofing felts manufacture, under carriage sealant within the automobile industry, also in electric cable joint protection, joint filling compound, sealant compound and a multitude of industrial uses. In addition fuel oil will be added to method fer increasing penetration if needed for custom usage and requirement.

In surfacing, before using bitumen 150/5 surfaces must be dry, clean and free of loose types, curing products, disorders, and slurry. Furthermore if you use this types of bitumen without cleaning area bitumen 150/5 will easily remove.

Application 

Oxidised Bitumen should be heated double temperature against the softening point to be able to have flow and viscosity. Blown asphalt also is aesthetic adhesive substrate for asphalt membranes. In addition metal and concrete protective coating under atmospheric conditions. Oxidized Bitumen 105-35 is used for coating of pipelines. Also impregnated of coating of papers and boards. Bonding agent for tiles and mastic also bonding agent for cork plates and adhesive for roofing felts. Furthermore Blown bitumen is adhesive for laminated boards for protection for electrical wires.

Hard asphalt grades also suitable for sealing saw cuts and joints where there is expected to be the minimum amount of moving in the joint. Their wide temperature range prevents bleeding in high temperature uses. Blown asphalt can also be used in industrial usages like roofing, flooring, mastics, pipe coatings, electrical roles.

Storage/Handling  

10 Years with multi time heating and colding, please refer to MSDS. Pars Universal Bitumen Company guaranty the quality of Oxidized Bitumen 150/5 with the arrangement of international warden to check quality and quantity of product during the loading to the vessel. Also controlling production by QC by batch test report before shipping.

Packing 

PUB-LTD manufacturer of oxidized bitumen 150/5 in various packing including. bitumen 150/5 is available in 25 kg meltable and craft bag, drum, also as bulk. In addition oxidized bitumen packing also palletize, 40 bags can stack on the pallet. 20 pallet can load to the 20ft container.

Oxidized Bitumen 105-35 Test data sheet:

TEST SPECIFICATION

STANDARD RANGE

TEST METHOD

Specific gravity @25/25 C

1.05 approx.

D-70

Penetration @25C

30/40

D-5

Softening point C

100/110

D-36

Ductility@25C

1.5min

D-113

Loss on heating (wt)%

0.2max

D-6

Flash point C

260min

D-92

Solubility in CS2 (wt)%

99min

D-4

Specific gravity @25/25 C

1.05 approx.

D-70