PUB-LTD is a dynamic and multi-faceted limited company based in Turkey actively involved in manufacturing procurement distribution and export of various grades of oxidized bitumen & penetration Bitumen as bitumen 60/70, Bitumen Penetration 80-100, bitumen 40/50, bitumen 160/220 that suitable for road, water proofing.
Usage of Penetration bitumen 80/100
pub-ltd asphalt penetration grade 80-100 is semi hard penetration grade bitumen using as paving.
This grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical specification.
Most of the companies use this grade of bitumen in the manufacture of hot mix asphalt for bases and wearing courses.
Bitumen 80/100 is most used bitumen grade and basic material for all other bitumenious products.
This grade mainly uses in hot mix asphalt factories. It uses for bases and wearing courses. Bitumen 10/20 ensures long-term savings because it allows for thinner pavement design. Furthermore, uses up to 30% less asphalt than traditional designs. Ensuring extended pavement life.
Softening Point and Penetration of Bitumen 80-100
Penetration grade bitumen supplied by PUB-LTD is pure petroleum grade bitumen, manufactured from vacuum bottom by passing hot air. The bitumen supplied by PUB-LTD is produced from remain of crude oil after cracking and removing hydrocarbon. Penetration grade bitumen 80/100 has penetration between 80~100 desi-millimeter and softening point between 48 ~ 56C. The penetration grade bitumen 80/100 has a thermoplastic property which is like as synthetic resin material which gets softer with heating and hardens when cooled. This grade of bitumen 80/100 has very strong viscosity compare to other grades.
Guaranty/warranty of Bitumen Penetration 80-100
PUBLTD guaranty the quality of Bitumen 80-100 with arrangement of international inspector to check quality and quantity of the bitumen during the loading to vessel and controlling the production by QC by batch test report before shipping. PUBLTD guaranty the quality to meet with ASTM/EN 12591.